Grain Systems PNEG-1935 - Manual (Page 10)

2. Decals
10 PNEG-1935 Vision Hybrid for Portable Dryers
DC-972
WARNING
Moving parts can crush
and cut. Keep hands
clear. Do not operate
without guards in place.
Failure to do so could
result in serious injury.
GSI Group 217-226-4421
DANGER
Rotating auger will crush
and cut. Auto equipment
can start at anytime. Do not
enter until electric power is
locked in off position. Failure
to do so will result in serious
injury or death.
GSI Group 217-226-4421 DC-974
Automatically controlled
belt drive can start at
anytime. Keep hands
clear. Failure to do so
could result in serious
injury.
GSI Group 217-226-4421 DC-971
WARNING
Decal: DC-972
Decal DC-972 is located on the bottom auger belt guard and the front bearing
plate (which is visible when the bottom auger belt guard is removed).
An alternate location would be at the rear of the dryer for portable dryers
equipped with the Front Discharge Option.
Decal: DC-971
Decal DC-971 is located on the bottom auger belt guard and the front bearing plate
(which is visible when the bottom auger belt guard is removed). An alternate location
would be at the rear of the dryer for portable dryers equipped with the Front
Discharge Option.
Another location for decal DC-971 is on the top of the auger belt guard (one on the
belt guard cover and one on the inside belt guard body visible when the belt guard
cover is removed).
Decal: DC-974
Decal DC-974 has several different locations. Two are located on the front end panel
below the fan/heater. Two are located on the rear end panel below the rear access
door. Two are located on the auger discharge box (one on the outside top and one on
the inside of the flapper lid next to the discharge mercury switch). One more of these
decals is located inside the plenum on the rear plenum closure door just inside the rear
access door.