Grain Systems PNEG-1755 - Manual (Page 28)

4. PLC WatchDog Operation
28 PNEG-1755 PLC WatchDog
Figure 4T
If a change is to be made to the time and date of the system, the user should verify the time/date
information displayed under “New Settings” and then proceed to press the “Update Time Settings” button.
Upon pressing this button, the updated information will be sent to and stored in the PLC. The updated
information will also change on the web page.
Pressing the “Return to Main Menu” button will return the user back to the screen that is shown in
Figure 4M on Page 21 .
Log Off Button
Pressing the “Log Off” button changes the password status to inactive. The user must always do this
before closing the web browser. Failure to properly log off may allow additional users access to the
PLC WatchDog application.
SECURITY NOTE: Ultimately, it is the End User’s responsibility to make sure the PLC WatchDog is
properly placed behind a secured network security system.