Grain Systems PNEG-1755 - Manual (Page 26)

4. PLC WatchDog Operation
26 PNEG-1755 PLC WatchDog
If a change is to be made to the current settings of the system, the user should verify the information
displayed under “New Settings” and then proceed to press the “Update System Variables” button. Upon
pressing this button, the updated information will be sent to and stored in PLC. The updated information
will also change on the web page.
Figure 4R
Pressing the “Return to Main Menu” button will return the user back to the screen that is shown in
Figure 4M on Page 21 .
Email Settings Button
Password status must be active to enable this function.
Pressing the “Email Settings” button will bring up the screen that is shown in Figure 4S on Page 27 . The
“Current Settings” title is shown on the bottom half of the screen. This is the current information that the
system is using for communications to the user. The information that is listed under the “New Settings” title
is the user entered data from the “View Data - PLC WatchDog” web page.