Rough Country 664 User Manual
Page 6
REAR INSTALLATION INSTRUCTIONS
1. Jack up the rear of the vehicle and support the vehicle with jack stands, so that the rear wheels are off the ground.
Chock front wheels.
2. Remove the rear tires/wheels
,
using a 19mm deep well socket.
3. Support the rear axle with a floor jack.
4. Remove the shock from the rear lower mount as shown in Photo 23 using a 15mm socket/ wrench.
5. Remove the bolt from the upper sway bar mount on the frame using a 18mm socket / wrench as shown in Photo 24.
6. Lower the rear end with the floor jack and remove the coil spring. See Photo 25.
7. Remove the stock upper coil isolator and retain for reuse. See Photo 26.
8. Remove the bump stop as shown in Photo 27 and remove the bump stop cup from the frame using a 15mm socket.
See Photo 28.
PHOTO 23
PHOTO 24
PHOTO 25
PHOTO 26
PHOTO 27
PHOTO 28
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)