beautypg.com

Rough Country 349.24 User Manual

Page 8

background image

POST INSTALLATION INSTRUCTIONS

Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile, fixed
and heated members. Check steering gear for interference and proper working order. Test brake system.
Perform steering sweep. Check to ensure brake hoses have sufficient slack and will not contact rotating, mobile, or fixed
members, adjust lines/brackets to eliminate interference and maintain proper working order. Failure to perform inspec-
tions may result in component failure.
Re-torque all fasteners after 500 miles. Visually inspect components and re-torque fasteners during routine vehicle ser-
vice.
Readjust headlights to proper settings.
It is the buyer’s responsibility to have all bolts/nuts checked for tightness after the first 100 miles and then every 1000
miles. Suspension components every 3000 miles.

Thank you for choosing Rough Country Suspension for your Off Road needs.

DRILLING TEMPLATE