Rough Country 323S User Manual
Page 5
11. Remove lower strut mount using 21mm and 24 mm wrench.
See Photo 7.
12. Remove sway-bar link from sway-bar using 16mm wrench.
See Photo 8.
13. Remove upper strut mount using 15mm wrench and remove strut.
See Photo 9.
14. Using a dead blow hammer remove axle from diff.
See Photo 10.
15. Using 24mm wrenches remove lower control arm. Retain the stock hardware for reuse.
See Photo 11.
16. Unplug diff wiring harness from the differential.
See Photo 12.
PHOTO 7
PHOTO 8
PHOTO 9
PHOTO
PHOTO
PHOTO 12
REMOVE LOWER STRUT FROM ARM
REMOVE UPPER SWAY BAR HARDWARE
REMOVE UPPER STRUT MOUNT HARDWARE
STRIKE AS SHOWN TO REMOVE SHAFT
REMOVE LOWER CONTROL ARM
UNPLUG DIFF HARNESS
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)