Rough Country 323S User Manual
Page 13
1. Remove wheels using a 22mm socket.
2. Remove ABS clip from axle.
See Photo 1.
3. Remove the brake line as shown in
Photo 2 using 13mm.
4. Remove sway-bar link using 8mm and 18mm wrench for lower end and 18mm for top end.
See Photo 3 & 4.
5. Support rear end.
6. Remove the shocks from the axle using 21mm wrench.
See Photo 5.
7. To remove the upper shocks from the frame mount, remove the inner fender well using 8mm socket.
See Photo 6.
There are
10 bolts on driver side and 10 on passenger side. This is done to gain access to nut on back of shock.
Use a socket on back side to remove bolt.
REAR INSTALLATION INSTRUCTIONS
PHOTO 1
PHOTO 2
PHOTO 3
PHOTO 4
PHOTO 5
PHOTO 6
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)