Rough Country 585 - Manual (Page 8)

POST INSTALLATION
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering for interference and proper working order. Test brake system.
2. Perform steering sweep. The distance between the tire sidewall and the brake hose must be checked closely. Cycle
the steering from full turn to full turn to check for clearance. Failure to perform inspections may result in component
failure.
3. Have a qualified alignment center realign front end of vehicle to factory specifications. You will note in driving to
alignment that toe will be out and only minor adjustments, if any, will be needed to caster and camber.
Caster Left
Caster Right Camber Left Camber Right Toe-in Need
3 3.5 0 -1/4 -1/32
4. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine vehicle
service.
1. Readjust headlights to proper settings.
MAINTENANCE INFORMATION
It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 500 miles and then every
1000 miles. Wheel alignment steering system, suspension and driveline systems must be inspected by a qualified pro-
fessional mechanic at least every 3000 miles
Thank you for purchasing a Rough Country Suspension System.