Rough Country 585 User Manual
Page 5
9. Install the coil on the strut cartridge and compress the coil if needed to install the upper strut nut using a 15mm
wrench. See Photo 6.
10. Install the strut supplied spacer on the top of the strut assembly as shown in Photo 7.
11. Reinstall the strut on the upper frame mount with the factory hardware using a 15mm wrench. See Photo 8.
12. Reinstall the strut on the lower mount with the factory hardware using a 30mm socket. See Photo 9.
13. Reinstall the tie rod end that was removed in step 4 using a 18mm wrench. Tighten hardware.
14. Reinstall the tires and wheels.
15. Lower the vehicle to the floor.
Photo 6
Photo 7
Photo 8
Photo 9
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)