Rough Country 698S - Manual (Page 8)

POST INSTALLATION
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering for interference and proper working order. Test brake system.
2. Perform steering sweep. The distance between the tire sidewall and the brake hose must be checked closely. Cycle
the steering from full turn to full turn to check for clearance. Failure to perform inspections may result in component
failure.
3. An alignment by a certified alignment professional with experience in aligning lifted vehicles must be performed.
Align vehicle to factory specifications.
4. Readjust headlights to proper settings.
5. Check hardware after the first 500 miles and then every 1000 miles.
INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on
to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.
Thank you for purchasing a Rough Country lift for your Jeep.
DON’T FORGET YOUR ROUGH COUNTRY STEERING STABILIZER!!! CALL YOUR DEALER FOR DETAILS!!!
Part# PERF87317