Rough Country 324S User Manual
Page 14
9. Remove upper track bar bolt using 21mm wrench.
See Photo 7.
10. Remove the vent hose from the frame.
11. Remove coil springs.
See Photo 8.
12. Remove the upper control arm using 24mm wrench and socket on the frame and axle.
See Photo 9 & 10.
13. Install control arm in the axle and frame mounts with stock hardware. Tighten using 24mm wrench.
See Photo 11 &
12.
PHOTO 7
PHOTO 8
PHOTO 9
PHOTO
PHOTO 11
REMOVE TRACK ROD FROM FRAME
REMOVE THE COIL SPRING
REMOVE STOCK UPPER ARM FROM FRAME
REMOVE STOCK UPPER ARM FROM AXLE
INSTALL ARM ON AXLE
PHOTO 12
INSTALL ARM ON FRAME
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)