Rough Country 592.20 - Manual (Page 5)

29. Reinstall the factory unit install in the new stabilizer bracket
using the factory bolt that was removed from the factory
steering stabilizer.
30. Install tires and wheels and lower the vehicle to the ground.
31. Install the new sway bar links in the factory location with the
factory hardware and using a 18mm wrench. See Photo
13.
30. Tighten the radius arm hardware.
31. Install the track bar in the new track bar bracket using a
30mm wrench. NOTE: It may be necessary to start the
truck and turn the wheels in the direction the track bar
needs to go in order to align the track bar with the hole.
Install using the stock track bar hardware.
Photo 13