Atdec Spacedec SD-FS-H Installation manual - Manual

D Horizontal Rail
Brace
C Horizontal Rail
C Horizontal Rail
G
U Screw M8x40mm
S
U
V
Component Checklist
Installation Instructions SD-FS-H
IMPORTANT INFORMATION:
Step 1. Install the Pole to the desk.
Step 2. Assemble Horizontal Support Rail.
! IMPORTANT - Install Spacedec Free Standing Hex as per Installation Instructions.
! This product supports a maximum load of 8kg (17.5lbs) in each screen.
! This product supports VESA mounting hole configurations: 75x75mm and 100x100mm.
! This product is designed to support six screens of similar weight & size when configured to use the freestanding base.
! Using less than six screens may result in the stand becoming unbalanced & unstable.
! The manufacturer accepts no responsibility for incorrect installation.
Check you have received all parts against the component checklist and Hardware.
Spacedec Freestanding Hex
A. Pole
B. Freestanding Base
C. Horizontal Rail (x4)
D. Horizontal Rail
Brace (x2)
E. Pole Cover
F. Mounting Head
L/R (x4)
G. Mounting Head
Centre (x2)
I. Pole Top
Cap (x2)
J. Spanner
L. Washer 3/8”
M. Spring
Washer 3/8”
O. Screen Mounting
Screw M4x10 (x24)
P. Screw
M8x12mm (x4)
R. Spring Washer
M6 (x3) V. Screw M6x8mm (x4)
U. Screw M8x40mm (x8)
S. Allen Key M5 H. Cable Clip
w/ Screw (x12) K. Bolt Through
Plate
N. Bolt 3/8”
Q. Screw
M6x15mm (x3)
T. Allen Key M6
Desk
A Pole
K Bolt Through Plate
L Washer 3/8”
M Spring Washer 3/8”
N Bolt 3/8”
A Pole
Desk
B Freestanding Base
K Bolt Through Plate
L Washer 3/8”
M Spring Washer 3/8”
N
T
Hardware: Tools Required:
Phillips Head Screw Driver
Option 1: Bolt Through Option 2: Freestanding (with optional security bolt)
Bolt 3/8”
Allen Key M6
Q Screw M6x15mm
1. Loosen Thumb Screw.
2. Detach Bracket to mount into Horizontal Rail.
G. Mounting Head - Centre
Screw M8x40mm
Allen Key M5
Screw M6x8mm
Mounting Head - Centre
Bracket
TIGHTEN
TIGHTEN
DETACH
TIGHTEN
TIGHTEN
R SpringWasher M6
LOOSEN 1
2
Spacedec