Atdec Telehook TH-3260-UFB Technical specs - Manual

NOTE
The Telehook 32-60 Wall Fixed supports LCD and Plasma Flat Panel Displays
from 32” (81cm) to 60” (152cm)
Maximum load = 91kg (200lbs)
This product suits displays with mounting hole patterns from 180mm to 740mm
wide (7”-29”) by 93mm to 500mm high (3.66”-20”).
Mounting hardware included Warranty: 10 years limited
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 11.04.11 ©
TM
General Features B
Mounting screws included:
M8x15mm / M8x35mm / M8x45mm (x4 each)
M6x15mm / M6x35mm / M6x45mm (x4 each)
M5x15mm / M5x35mm / M5x45mm (x4 each)
M4x15mm / M4x35mm / M4x45mm (x4 each)
Mounting hardware included:
Coach Screw (x4) Masonry Wall Plug (x4)
Washer (x4) Multi Washer (x4)
Spacer Bush (x4) Recessed Hole Bush (x4)
Technical Specifications
TELEHOOK
32”-60” WALL FIXED
Mounting screws and hardware
32mm
(1.25”)
93mm
(3.66”)
93mm to 500mm
(3.66” to 20”)
180mm to 740mm
(7” to 29”)
23mm
(0.91”)
254mm
(10”)
536mm
(21.10”)
120mm
(4.75”)
10mm
(0.39”)
28mm
(1.10”)
21mm
(0.83”)
34mm
(1.34”)
610mm
(24”)
795mm
(31.25”)
209mm
(8.25”)
273mm
(10.75”)
200mm
(8”)
207mm
(8.15”)
8.5mm
( 5 / 16 ”)