Atdec Spacedec SD-AT-DW product brochure - Manual

Acrobat | Articulated arm
The SD-AT-DW wall mount helps to conserve valuable desk space by mounting
monitors on a wall. This leaves a monitor footprint of zero and creates an extremely
productive workspace, free from clutter. Offers the ultimate in versatility. With three
separate pivot/adjustment points, the user has full control over their monitor position
in terms of height, reach, tilt and screen rotation. Height adjustment is effortless due
to the monitor weight counter balancing gas strut mechanism which glides the
monitor into position. Screen tilt and pan of up to 40° is also made simple with a
ball joint integrated into the arm to position the screen for the optimum viewing
angle. Combined, these features ensure that all adjustments can be made from a
seated position. Ease of use clearly drives this mount making it an obvious choice
for ergonomic excellence and user productivity.
Product key features:
Offers a wide range of movement via 3 pivot points
Ball joint mechanism allows 40 degrees of display adjustment in any direction from the vertical plane
Portrait to landscape rotation
Arm maximum reach: 635mm (25”)
Display height adjustment range: 460mm (18”)
Integrated cable management
Comes with all mounting hardware
Mounting hole pattern:
75mm x 75mm;
100mm x 100mm
SD-AT-DW
Weight carrying capacity:
Minimum 3kg (6.6lbs), maximum 9kg (19.8lbs)
Atdec North America www.atdec.com
Atdec Global www.atdec.com.au
Fits most displays from 12" to 24"
Ball joint mechanism allows
display adjustment of 40°
in any direction
Portrait to landscape
rotation
Gas strut mechanism for
effortless display adjustment
from a seated position
Offers a wisde range of
movement via 3 pivot points
Integrated cable management