Atdec Telehook TH-1040-CT-DV Installation manual - Manual

! This product is to be installed in conjunction with TH-1040-CTS and TH-1040-CTL Ceiling Mounts only.
Component Checklist
VESA Plate
Installation Instructions TH-1040-CT-DV
Additional Mount Accessory for TH-1040-CTS and TH-1040-CTL
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware above.
Step 2. Install Mount Head Accessory on TH-1040-CTS or TH-1040-CTL
! IMPORTANT - Install Telehook 1040 Additional Mount Accessory as per Installation Instructions.
Hardware
! The manufacturer accepts no responsibility for incorrect installation.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 12 .03.12 ©
Installation Complete
M4x16/25mm
(x4 each)
M5x16/25mm
(x4 each)
M6x16/30mm
(x4 each)
Refer to TH-1040-CTS/TH-1040-CTL Installation Instructions, Step 8. Attach VESA Plate to Display.
M4/5 Washer M4/5 Washer (x4)
M4/5 Spacer (x4)
M6/8 Spacer (x4)
Security Screw
(optional)
Display
Mounting
Screws
5mm/3mm
Allen Keys
(x1 each)
Mount Head
Accessory
Mount Head
Rear
NOTE: Phillips-head
screwdriver not supplied
M6x20 Socket
Cap Screw (x2)
Socket Cap Screw
ATTACH
Socket Cap
Screw
Use the 5mm Allen Key supplied.
Attach Mount Head Rear
to Mount Head Accessory
with Socket Cap Screws (x2).
Mount Head Rear
Mount Head Accessory
5mm Allen Key