Atdec Spacedec SD-SA-DK Technical specs User Manual
Spacedec acrobat, Technical specifications, Swing arm
A
General Features
A
Technical Specifications
SPACEDEC ACROBAT
SWING ARM
As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply
with the international VESA standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice.
Published: 11.04.11
Display Compatibility:
Spacedec Acrobat is compatible with most LCD displays that use the VESA international mounting standard.
Please refer to the VESA Compliance List on the Atdec website to view all compatible LCD models (atdec.com)
Display Weight Compatibility:
3kg to 9kg (6.6lbs to 19.8lbs)
Desk Mounting Options:
Bolt Through (included in package) - Suits desktop thicknesses of 12mm to 40mm (1” to 1.5”)
Desk Clamp (included in package) - Suits desktop thicknesses of 12mm to 38mm (1” to 1.5”)
Display Mounting Options:
Suits 75mm x 75mm and 100mm x 100mm mounting hole patterns
Cable Management:
Cable Wrap Manager Clip, Cable Clips and Cable Wrap (included in package)
Colours:
Polished Aluminum, Silver or Black
Warranty:
5 years limited
4
3
2
1
Arm swings 360° around mounting post
Up to 460mm (18”) height adjustment
Pivot head pans 85°
±40° tilt, ±40° pan
Portrait/Landscape rotation
1
2
3
4
5
5
NOTE: The following information is based on a Spacedec Acrobat Swing Arm with the
standard 350mm arm set at the 6kg gas strut setting.
For technical information regarding Spacedec Acrobat’s optional extras please refer to
“Technical Specification Spacedec Acrobat Optional Extras” at atdec.com
Desk Clamp
75mm x 75mm mounting hole pattern
100mm x 100mm mounting hole pattern
4x10mm
Screws
75mm
75mm
Extension Clip
4x12mm or
4x16mm Screws
100mm
100mm
Desk Mounting Options
D
Display Mounting Options
E
Suits 75mm x 75mm and 100mm x 100mm mounting hole patterns.
Bolt Through
Suits desk thicknesses of 12mm to 38mm (0.5” to 1.5”)
NOTE: Desk Clamp requires min. 60mm(
2.36”) of desk overhang
Suits desk thicknesses of 12mm to 40mm (0.5” to 1.5”)
Desk
8mm
(0.31”)
58mm (2.28”)
52mm
(2.05”)
39mm
(1.5”)
63.5mm
(2.5”)
65mm
(2.56”)
Cable Management
F
All Spacedec Acrobat Swing Arms are supplied with 650mm (25.5”) of Ø16mm (0.63”) black Cable Wrap.
Cable Clips
Cable Wrap
Manager Clip
Cable Wrap
38mm
(1.5”)
Display
Display
Cable Wrap
Manager Clip