Atdec Spacedec SD-POS-VBM Technical specs - Manual

Technical Specification SD-POS-VBM
Dimensions
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 08.10.11 ©
Display | POS Multi
NOTE:
! This product has been designed to mount VESA compliant displays with 75mmx75mm and 100mmx100mm hole patterns only.
! It will support displays upto a maximum weight of 20kg (44l bs). The B ack-to-Back Mount will support 2x20kg (88lb s) displays.
! Warranty: 10 years limited
Cable Access Port
NOTE: If cable access through
you will need to drill a Ø45mm
Cable Access Hole
(refer to Installation Instructions).
Back to Back Mount Mounting Hole Options
100mm
75mm 100mm
SD-POS-VBM-B2B
Mounting Plate F ootprint
137mm (5.39”)
70.7mm
(2.78”)
M4 T apped
Holes
ID
Ø46mm
(1.81”)
Install Security
Cable around
Internal P
ost
(3.30”)
84mm
168mm
(6.61”)
LOCKING HOLES (R efer to Installation Instructions for further details)
Direction Arrow
0 Locking Hole (Fixed)
0-90 Locking Hole
0-180 Locking Hole
0-270 Locking Hole
±20° Rotation
about central
axis
VESA Ball Mount
Each Ball Assembly has a 40
° range of movement.
75mm
90 180
270
355
5 Gap in
Rotation
0
90 180
270
355
0
5 Gap
in Rotation
USER
USER
Direction
Arrow
Direction Arrow
Your POS Multi offers 355°
of Rotation. This can also be
limited to suit a specific
application. The direction in
which you mount POS Multi
will determine where the 5°
gap in rotation is located,
and how you choose to limit
the rotation.
Mounting Options
Rotation Options
0° Rotation (Fixed)
0-90° Rotation
0-180° Rotation
0-270° Rotation
0-355° Rotation
OR
37mm x 43mm
(1.46” x 1.69”)
OD
Ø50.8mm
(2”)
370mm
(14.57”)
330mm
(13”)
390mm
(15.35”)
84mm
(3.30”)
244mm
(9.5”)
Ø106mm
(4.17”)
the post and work surface is required,