Atdec Visidec VF-WD Technical specs - Manual

Component Checklist
Component Checklist
Notes
Technical Information
Technical Specifications
A
B
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 08.04.11 ©
Maximum Load: 8kgs (17.5lbs)
Display Compatibility: Visidec Focus Wall Direct is compatible with most LCD flat panel displays up to 24” (61cm) that
feature either 75 x 75mm or 100 x 100mm VESA mounting hole patterns.
Mounting Options: Visidec Focus Wall Direct can be mounted directly onto timber stud or masonry walls.
Included Hardware: All fasteners and mounting hardware is included.
Tools Required: Power drill, 5.5mm (1/4”) drill bit, 8mm (5/16”) masonry drill bit, Phillips Head screwdriver.
Colours: Black/Polished Silver. Warranty: 10 years limited
90mm
(3.50”)
100mm 75mm
58mm
(2.25”)
75mm
100mm
93.5mm
(3.75”)
VESA Mounting Plate
in 75x75mm position
Ø6.5
VESA Mounting Plate
in 100x100mm position
Portrait/Landscape
Maximum: 95°
PAN
Maximum: ±45°
With typical 24” display attached: ±13°
TILT
Maximum: ±70°
With typical 24” display attached: ±29.5°
VF-WD