Atdec Telehook TH-2050-UFL Installation manual - Manual (Page 2)

Step 4. Attaching Mounting Brackets to Display
TOP
Back of Display
Display Mounting Screw
Multiwasher
Mounting Bracket
Step 6. Attach Locking Blocks to fully secure the Display
WALL
Pull down both Spring Lock
Ties to open catch.
Hook the Display
to the Arm/Wall
Mount.
The mounting brackets support
hole configurations from
200x100mm to 400x400mm.
1 HOOK
3 PUSH
DOWN
1 HOOK
2 LOCK 4
2 PULL
DOWN
3 PUSH
DOWN
Push down Display into catch. Release Spring Lock Ties
to secure Display.
NOTE: Ensure that Spring
Lock is fully engaged.
RELEASE 4
Step 5. Attaching/Detaching Display to the installed Arm (2 people required)
Back of Display
Locking Blocks