Th-3060-uf installation instruction2 (low-res)-01 – Atdec Telehook TH-3060-UF Installation manual User Manual
Page 2
WALL
WALL
Step 3. Attaching Brackets to Display
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 12/03/2012 ©
Lift your Display, hooking the Mounting
Brackets over the top of the Wall Plate Rail.
Pull down on the two Straps, and gently push
the bottom of the Display towards the Wall.
Release the Straps to engage the locking
mechanism, safely securing the Brackets to
the Wall Plate.
Step 4. Attaching/Detaching Display to Wall Plate
(2 people required)
Step 5. Hide Straps
Installation Complete
Detaching Display from Wall Plate:
Pull down on both Straps to disengage the
locking mechanism. At the same time lift
the Display away from the Wall Plate.
Spacer
(optional, use only for
recessed mounting holes)
Mounting Screw
Multi-washer
Left Mounting
Bracket
Right Mounting
Bracket
Straps
PULL
SECURE
RELEASE
Note: Make sure the TV is correctly hooked before
releasing the Display.
If necessary, shorten
the length of the Straps
using the hook-and-loop
fastener strip, so that
they cannot be seen.
TOP
HOOK