Sony XAV-70BT - Manual (Page 38)

38
For details on compatibility of your device, visit
the support site.
Bluetooth status indication
Installing the external microphone
XA-MC10
To capture your voice during handsfree calling,
you need to install the external microphone XA-
MC10 (supplied).
For details on how to connect the microphone,
see the supplied installation/connections manual.
Pairing
Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
1
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
2 on this unit and on
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
see the manual of the Bluetooth device.
*1 If you delete the device registration from this unit,
you need to perform pairing again.
*2 Passkey may be called “passcode,” “PIN code,”
“PIN number,” “password,” etc., depending on the
Bluetooth device.
Tip
You can pair up to 9 devices.
Searching from this unit
Check that the other Bluetooth device is set to
allow for searching (discoverable) beforehand.
1 Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3
Touch “Search.”
Search of connectable Bluetooth devices
starts.*
1 * 2
After search is complete, the list of detected
devices*
3 appears.
*1 If the Bluetooth signal of this unit is off, it
activates automatically when searching starts.
*2 Search time varies depending on the number of
connectable devices.
*3 The name or address (if name is unavailable) of
detected devices are displayed.
4
Touch the device to connect.
None: No device is connected for
audio streaming purpose.
Flashing: Connection is in progress.
Lit: Connected to a device.
None: No cellular phone is connected
for handsfree calling purpose.
Flashing: Connection is in progress.
Lit: Connected to a cellular phone.
Signal strength status of connected
cellular phone.
Remaining battery status of connected
cellular phone.
Support site
http://support.sony-europe.com/
Bluetooth signal indicator: Lights up
when the Bluetooth signal is on.
ATT
12:00 15
Calling...
Calling...
Name
0123456789
Bluetooth status indications
1/2
ATT Back Top
12:00
BT Menu
Signal
Discoverable
Device Name
Search
Device List
OFF / ON
Hide / Show
15