Bluetooth settings – Sony XAV-70BT User Manual
Page 47
47
Bluetooth settings
The Bluetooth settings can be configured in “BT
Menu.”
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3
Touch the desired item in the list and
configure the setting.
The items in the Bluetooth setting menu are as
follows.
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit’s ring
tone may be output even if set to “Cellular.”
Note
For details on the setting of other Bluetooth devices,
see their respective manuals.
“Signal”*
1
Activates the Bluetooth signal: “ON,” “OFF.”
“Discoverable”*
1
Allows the other Bluetooth device to search for
this unit: “Show,” “Hide.”
“Device Name”*
1
Changes the name of this unit displayed on the
connected device. (Default setting: “Sony
Automotive”)
For details on basic operation of keyboard, see
“About the keyboard to edit the name” on
page 45.
“Search”*
1
Searches for connectable Bluetooth devices.
“Device List”*
1
Shows the list of registered devices; connects to
a registered device; deletes all registrations.
“Auto Answer”*
1
Answers an incoming call automatically.
– “Short”: to answer automatically after 3
seconds.
– “Long”: to answer automatically after 10
seconds.
– “OFF”: to not answer automatically.
“Ringtone”*
1
*
2
Uses the ring tone of this unit or the connected
cellular phone: “Default,” “Cellular.”
“EC/NC Mode” (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise in phone call
conversations.
Set to “Mode 1” normally.
If the outgoing sound quality is unsatisfactory,
set to “Mode 2” or “OFF.”
“MIC Gain” (page 42)
Adjust the volume for the other party: –2 ~ +2.
“Initialize”*
1
Initializes all Bluetooth-related settings. Touch
“Yes” in the confirmation display.