Sony XAV-70BT - Manual (Page 42)

42
Receiving calls
With the unit connected to the cellular phone,
you can receive a call in any status.
The following display indicates an incoming call,
along with the ring tone.
To answer the call
Touch .
To adjust the ring tone volume
Press (VOL) +/– while receiving a call.
The level of ring tone volume will be stored into
memory, independently from the regular volume
level.
To reject a call
Touch .
Note
The ring tone and talker’s voice are output only from
front speakers.
Tips
• You can set to answer a call automatically (page 47).
• You can set to use the ring tone of the cellular phone
or this unit (page 47).
Operations during a call
The following display appears during a call.
To adjust the talker’s voice volume
Press (VOL) +/– during a call.
The level of talker’s voice volume will be stored
into memory, independently from the regular
volume level.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch “Open Keypad,” then the required number
keys.
To transfer the current call to the
cellular phone
Touch “Handsfree OFF.”
To transfer back to the handsfree call, touch
“Handsfree ON.”
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
To adjust the volume for the other
party
1
Touch “BT Menu.”
2
Touch v/V to scroll, then “MIC Gain.”
3
Touch –/+ to adjust the level.
The level is adjustable in single steps,
between –2 and +2.
4
Touch “Back” repeatedly to return to
the previous displays.
To end a call
Touch .
12:00 15
ATT
Incoming call...
Incoming call...
Name
0123456789
12:00 15
ATT
On the Line.
10:59
Name
0123456789
Open Keypad Handsfree OFF
Top BT Menu