Sony XAV-70BT - Manual (Page 26)

26
Changing the audio channel
When playing VCD/CD/MP3/WMA/AAC/
MPEG-4, you can select the right or left channel
sound to listen through both right and left
speakers.
The options are indicated below.
“2-Ch”: Standard stereo sound (default)
“L-Ch”: Left channel sound (monaural)
“R-Ch”: Right channel sound (monaural)
For VCD/CD/MP3/WMA/AAC
1
During playback, touch “Play Menu,”
then “Stereo” repeatedly until the
desired audio channel appears.
For MPEG-4
1
During playback, touch “Play Menu,”
then “Audio” repeatedly until the
desired audio channel appears.
To close the play menu, touch “Play Menu.”
Note
You may not be able to change the audio setting
depending on the disc.
Tip
The operation by the card remote commander
(pressing (AUDIO) repeatedly) is also available.
Adjusting the audio output level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
1
During playback, touch “Play Menu.”
2 Touch the “Adjust” box to set to “ON.”
3
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch “Play Menu.”
Locking discs
— Parental control
*
* Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.
You can lock a disc, or set playback restrictions
according to a predetermined level such as
viewer age. Restricted scenes can be blocked or
replaced with different scenes when a parental
control compatible DVD is played.
Activating parental control
1
While the unit is off, touch “Source
List,” then
.
2
Touch “Visual.”
The visual setting menu appears.
3
Touch v/V to scroll, then “DVD
Parental Control.”
The password setting display appears.
4
Touch the number keys to enter your
password, then “OK.”
5
To confirm, touch the number keys to
reenter your password, then “OK.”
The setting is complete.
To delete an entered number, touch “Clear.”
To return to the previous display, touch “Back.”
Deactivating parental control
1 Follow steps 1 to 3 above.
The parental unlock display appears.
2 Touch the number keys to enter your current
password.
“Parental Unlocked” appears, and the parental
control is deactivated.
Changing the password
Deactivate the parental control, then activate
again using the new password.
MPEG-4