Altronix AL600ULACMCBR Installation Instructions - Manual (Page 6)

- 6 - ACMCBseries
LED Diagnostics:
Power Supply Board
LED
Red (DC) Green (AC) Power Supply Status
ON ON Normal operating condition.
ON OFF Loss of AC, Stand-by battery supplying power.
OFF ON No DC output. Short circuit or thermal overload condition.
OFF OFF No DC output. Loss of AC. Discharged battery.
ACM8 Access Power Controller
LED ON OFF
LED 1- LED 8 (Red) Output relay(s) energized. Output relay(s) de-energized.
Trg (Green) FACP input triggered (alarm condition). FACP normal (non-alarm condition).
- --
D C
+
L G N
ALTRONIX CORP.
BKLYN, N.Y. 11220
MADE IN USA
- --
B
A T
+
AC FAIL BAT FAIL
Battery and AC
Supervision Circuit
(power limited)
Battery connection (non-power limited)
Door
Wire
Strap
(from
Enclosure
to Door)
DC Output to devices (power limited)
Fire
Alarm
Interface
Insulating
Barrier
Inputs (power limited)
unswitched 115VAC
power mains
(non-power limited)
Power Supply Board
CAUTION: De-energize unit prior to servicing.
For continued protection against fire hazard replace
fuse with the same type and rating .
Replace fuse cover before energizing. Green
Lead
Green
Lead
Keep power limited wiring separate from non-power limited. Use minimum .25" spacing.
12VDC Rechargeable Battery
(optional)
12VDC Rechargeable Battery
(optional)
CAUTION: When power supply board is set for 12VDC use only one (1) 12VDC
stand-by battery.
Fig. 2