Altronix HubWay 16Di Data Sheet - Manual

HubWay16Di Passive UTP Transceiver Hub w/Integral Isolated Camera Power
transmits UTP video, RS422/RS485 data and power over a single CAT-5 or
higher structured cable. Unit provides 16 camera channels in a space saving 1U
EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video
transmission range is up to 750 ft. max. per channel. Units are compatible with
AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv,
HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit
features individually selectable 24VAC or 28VAC fuse protected outputs with
surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with
Integral Isolated Camera Power can be used as an accessory module to trans-
mit video from up to 4 cameras over a single CAT-5 or higher structured cable
back to the HubWay16Di. In addition, the HubSat4D provides power to these
cameras locally to eliminate the possibility of voltage drop associated with long
cable runs.
HubWay16Di Passive UTP Transceiver Hub
with Integral Isolated Camera Power
Rev. DSHubWay16Di _10262012
Overview
Specifications
UL Listed for Commercial CCTV Equipment
(UL 2044). CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.
Agency Approvals
Input:
• 115VAC 60Hz, 5 amp or 230VAC 50Hz, 2.5 amp.
Video:
• Sixteen (16) channels of video over twisted pair
up to a distance of 750 ft. (228.6m) per channel.
• Sixteen (16) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Unit provides up to 1 amp max. per channel.
• Individually selectable 24VAC or 28VAC isolated
power outputs with OFF position.
• Class 2 Rated power limited outputs.
• Individual electronically isolated PTC outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• Total system power consumption: 450 W.
• 171 BTU/Hr.
• System AC input VA requirement: 450VA.
Features:
• Sixteen (16) power LEDs.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
-
HubWayAv2 Slim-line - compatible with all
HubWay UTP Hubs for AC or DC fixed cameras
or PTZs.
-
HubWayDv - compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs.
-
HubWayDvi - built-in isolation. Compatible with
all HubWay UTP Hubs for DC fixed cameras
or PTZs.
Mechanical:
• Units can be rack, wall or shelf mounted.
• Modular 1U standard EIA 19” rack mount chassis.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 18.45 lbs. (8.37 kg).
• Shipping weight (approx.): 19.75 lbs. (8.96 kg).
HubWay16Di