Altronix MOM5C Data Sheet User Manual
Overview specifications, Agency approvals, Input
MOM5C multi output power distribution module converts one (1) non-power limited
DC voltage input to five (5) power limited outputs. Each output will route power to a
variety of access control hardware and devices which includes Mag Locks, Electric
Strikes, Magnetic Door Holders, etc... These outputs will operate in both fail-safe and
fail-secure modes. Controlled trigger input is achieved through normally open (NO)
or normally closed (NC) supervised input or the polarity reversal from an FACP (Fire
Alarm Control Panel). A form “C” dry output relay will enable HVAC Shutdown,
Elevator Recall or trigger auxiliary devices.
MOM5C - Multi Output Power Distribution
Module for Access Control
Rev. DSMOM5C_04042013
Overview
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Agency Approvals
UL Listed Sub-Assembly for Access Control
System Units (UL 294) and for Power Supplies
for Fire Protective Signaling Systems (UL 1481).
• NFPA72 compliant.
MOM5C
Input:
• 12VDC or 24VDC from power supply.
Output:
• 12VDC or 24VDC selectable outputs.
• Five (5) individual power-limited class 2 outputs.
• Current limit is 2 amp @ 12VDC or 24VDC per output.
Fire Alarm Interface:
• Fire Alarm Panel or Access Control System trigger
inputs, (N.O. or N.C. supervised trigger input and
polarity reversal trigger input).
Visual Indicators:
• Red LED’s indicate condition of each power output.
• Power & input trigger LED’s.
Supervision:
• Fire Alarm Panel or Access Control System trigger
inputs. (NO or NC supervised trigger input and
polarity reversal trigger input).
• Power fail supervision relay (Form “C” contact
rated 1 amp @ 28VDC).
• Interfaces with most UL Listed Power Supplies
Mechanical:
• Enclosure dimensions (LxWxH)(approx.):
8.5” (215.9mm) x 7.5” (190.5mm) x 3.5” (88.9mm).
• Product Weight: 2.9 Lbs (1.315 kg).
• Shipping Weight: 3.9 Lbs (1.769 kg).
Altronix Corp.
140 58th St. Brooklyn, NY
California State Fire Marshal Approved (CSFM)
Enclosure Dimensions
(H x W x D) (approximate)
:
8.5” (215.9mm) x 7.5” (190.5mm) x 3.5” (88.9mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.125”
(28.575mm)
1”
(25.4mm)
1”
(25.4mm)
1”
(25.4mm)
5.25”
(133.35mm)
6.05”
(153.67mm)
6.05”
(153.67mm)
3.5”
(88.9mm)
3.5”
(88.9mm)
7.25”
(184.15mm)
2”
(50.8mm)
2”
(50.8mm)
8.125”
(206.375mm)
0.6”
(15.24mm)
1”
(25.4mm)
1”
(25.4mm)
0.6”
(15.24mm)
0.6”
(15.24mm)
1.125”
(28.575mm)
0.6”
(15.24mm)
3.625”
(184.15mm)