VEGA VEGABAR 82 Modbus and Levelmaster protocol - Operating Instructions - Manual (Page 13)

13
3 Product description
VEGABAR 82 • Modbus and Levelmaster protocol
46294-EN-131107
You can find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID
31088).
Welded sockets are used to connect the sensors to the process.
You can find further information in the supplementary instructions
"Welded socket VEGABAR series 80" (Document-ID 45082).
The electronics module VEGABAR series 80 is a replacement part
for pressure transmitters of VEGABAR series 80. There is a different
version available for each type of signal output.
You can find further information in the operating instructions "Elec-
tronics module VEGABAR series 80" (Document-ID 45054).
The supplementary electronics is a replacement part for sensors with
signal output Modbus.
You can find further information in the operating instructions "Supple-
mentary electronics Modbus" (Document-ID 41864).
Welded socket
Electronics module
Supplementary electron-
ics Modbus