M-AUDIO Lagoon - Manual (Page 5)

Minimum System Requirements
• Windows 95 or 98
• Pentium 166 or higher with MMX, 200 MHz recommended.
• 32 MByte RAM, 64 MByte recommended.
What’s in the Box?
Your LAGOON box contains:
• This Instruction Manual
• The LAGOON PCI card
• 1x1 MIDI Interface Cable
• Diskettes for Windows 95/98 installation
• Midiman Warranty Registration Card
Important: Please fill out the included Warranty Registration Card
and mail or fax it to us as soon as possible. Registering your
LAGOON will help us to give you the best possible service and
support.
The Lagoon Card
1. ADAT Sync Input/MIDI I/O: This 9-pin DB female connector will accept the
synchronization output of an ADAT tape recorder. Switching the K9 jumper on
the Lagoon board will alter the function of this connector to a 1 in/1 out MIDI
interface (see #4 in this list). Shown here MIDI cable is attached.
2. Toslink Optical Input: This standard female Toslink input jack accepts a standard
male Toslink plug, either ADAT 8-channel format output or S/PDIF 2-channel
format output as configured in the Lagoon Tools Applet (see section, “Lagoon
Tools Applet”).
4
1 .
2 .
3 .
4
.