VEGA VEGASON 65 Foundation Fieldbus - Manual (Page 57)

l
sensor_value
-
R aw sensor value, i.e. the uncalibrated measurement value from the sensor. Unit derives from
'S ensor_range.unit'
l
sensor_range
-
S ensor_range.unit' refers to 'Sensor_value', 'Max/Min_peak_sensor_value', 'Cal_point_hi/lo'
l
simulate_primary_value
l
simulate_secondary_value_1
l
simulate_secondary_value_2
l D evice Status
l L inearization Type
-
P ossible types of linearization are: linear, user defined, cylindrical lying container, spherical
container
l CURVE_POINTS_1_10
-
X and Y values for the user defined linearization curve
l CURVE_POINTS_11_20
-
X and Y values for the user defined linearization curve
l CURVE_POINTS_21_30
-
X
and Y values for the user defined linearization curve
l CURVE_POINTS_31_33
-
X and Y values for the user defined linearization curve
l CURVE_STATUS
-
R esult of table plausibility check
l SUB_DEVICE_NUMBER
l SENSOR_ELEMENT_TYPE
l
display_source_selector
-
S elects the type of value, which is displayed on the indicating and adjustment module
l
max_peak_sensor_value
-
H olds the maximum sensor value. Write access resets to current value. Unit derives from
'S ensor_range.unit'
l
min_peak_sensor_value
-
H olds the minimum sensor value. Write access resets to current value. Unit derives from
'S ensor_range.unit'
l CAL_POINT_HI
-
M in./max.-adjustment: Upper calibrated point of the sensor. It refers to 'Cal_level_hi'. The unit is
defined in 'Sensor_range.unit' hi
l CAL_POINT_LO
-
M in./max.-adjustment: Lower calibrated point of the sensor. It refers to 'Cal_level_lo'. The unit is
defined in 'Sensor_range.unit'
l CAL_LEVEL_HI
-
M in./max.-adjustment: Level at 'Cal_point_hi'. When writing 'Cal_level_hi' and 'Cal_type' = 1
(O nline) the 'Cal_point_hi' is automatically set to the current sensor value. The unit is defined in
'L
evel_unit'
l CAL_LEVEL_LO
VEGASON 65 • F oundation Fieldbus 57
10 S upplement
28794
-
EN
-081127