VTech CS6114-2 (with LED) Manual - Manual (Page 30)

27
Appendix
Battery
It takes up to 16 hours for the battery to be fully charged. When it is fully
charged, you can expect the following performance:
Operaton Operatng tme
Whle n use (talkng*) Seven hours
Whle not n use (standby**) Fve days
*Operatng tmes vary dependng on your actual use and the age of the battery.
**Handset s not chargng or n use.
The battery needs charging when:
A new battery s nstalled n the handset.
The handset beeps every 50 seconds whle on a call.
The handset beeps and
Low battery dsplays on the handset.
Place in charger dsplays on the handset.
A battery s properly nstalled and the screen s blank.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
Use only the battery(es) provded or equvalent. To order a replacement, vst
our webste at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
Do not dispose of the battery(ies) in a fire. Check with local waste management
codes for specal dsposal nstructons.
Do not open or mutlate the battery(es). Released electrolyte s corrosve and
may cause burns or njury to the eyes or skn. The electrolyte may be toxc
f swallowed.
Exercse care n handlng batteres n order not to create a short crcut wth
conductve materals.
Charge the battery(ies) provided with or identified for use with this product only in
accordance with the instructions and limitations specified in this manual.
Observe proper polarty orentaton between the battery and metallc contacts.
To prevent fire or shock hazard, do not expose this product to water or any type
of mosture.
•
•
•
•
•
•
•
•
•
•
•
•