VTech CS6114-2 (with LED) Manual - Manual (Page 17)

14
Telephone operation
Temporary ringer silencing
When the telephone s rngng, you can temporarly slence the rnger of the
handset wthout dsconnectng the call. The next call rngs normally at the
preset volume.
To silence the handset ringer:
Press OFF/
CANCEL
or MUTE/
DELETE
and then
Ringer muted dsplays.
Temporary tone dialing
If you have pulse (rotary) servce only, you can swtch from pulse to tone
dalng temporarly durng a call. Ths s useful f you need to send touch-
tone sgnals to access your telephone bankng or long dstance servces.
Durng a call, press
TONE
.
Use the dalng keys to enter the number. The telephone sends
touch-tone sgnals.
The telephone automatcally returns to pulse dalng mode after you end
the call.
Find handset
Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone
base once and then release when the
telephone s not n use.
All system handsets ring and flash
** Paging ** for 60 seconds.
To end paging:
Press /FIND HANDSET on the telephone base once and then release.
-OR-
Press /
FLASH
or any of the dalng keys ( 0-9,
TONE
or
#
) on the
handset to stop the pagng tone.
Multiple handset use (for CS6114-2 only)
You can use both handsets at a tme on an outsde call.
To share an outside call:
When a handset s already on a call and you would lke to jon the call,
press /
FLASH
on the other handset to jon the call.
To end the call, press OFF/
CANCEL
or place the handset n the telephone
base or charger. The call contnues untl all handsets hang up.
•
1.
2.
3.
1.
2.
•
•
•
•
Ringer muted
10:15
PM
12/25
Do not press and hold /FIND HANDSET for more than four seconds.
It may lead to handset deregstraton. If Not registered dsplays on the
handset, refer to Troubleshooting on page 29 to regster the handset to
the telephone base.