Veris Technologies MSP EC and pH (1997-2008 floppy disk drive 1.02E) - Operating Instructions User Manual
Page 10
Veris Technologies
Pub. #OM MSP03-1
10
Make sure the box beside “Append line feeds to incoming line ends” is checked. Click OK to close
the ASCII Setup box, then OK to close the properties box. Select the File drop down menu again,
and click on save.
2) Instrument setup:
At the display:
This is the second window you will see after powering up the unit if the system has any old files in it.
Select option 1.
Select #2 for transferring files through the serial port. The next screen will display information about
the files with the given file number.
Press any key to see options for the files.
In this menu, selecting (1) will continue to the transfer process. (2) will ask the user to confirm their
choice to delete the file. (3) will retain the files in memory and continue to the next sequential file
number in memory. (4) will exit to the main menu.
3) File transfer process
Select (1) on the instrument. A screen showing the first file available to transfer for the file number
will appear: