Veris Technologies VIS_NIR Spectrophotometer - Operating Instructions - Manual (Page 75)

Pub# OM17-NIR Shank
5-22
4. Now remove the housing, use a 3/32 hex wrench to loosen the set screw holding
in the lamp.
Figure 24
5. Disconnect the lamp and replace with a new lamp
Figure 25
Handle the lamp with care. Make sure not to touch the bulb itself. The bulb can
fair prematurely if oils are on the bulb. Bulb can be cleaned with alcohol if
touched.
6. Reassemble the shank following the same steps used for disassembly.