Veris Technologies pH Detector - Operating Instructions User Manual
Page 5
OM17-pH Detector
2-2
Tools required for Assembly and Field Operation adjustments
-
3/16” allen wrench
-
7/16”, 1/2”, 3/8”, 9/16”, 3/4” wrenches and/or sockets
-pliers
Handle installation: If probe handle was removed for shipping, reinstall by attaching pivot bolt, and
installing pins and cotter hairpins at top and bottom of rod actuator (Figure 3). Install brake lever
using 3/16” allen wrench, and zip-tie cable to handle (Figure 4).
Figure 3a and 3b
Figure 4