Veris Technologies pH Detector - Operating Instructions User Manual
Page 21
OM17-pH Detector
3-11
At any time during the mapping process, you can press the #4 key to stop the file. If you create
more than one file from the same field, you can bring the files into a spreadsheet program or GIS
and combine for whole field map display.
After #4 key is pressed during Data Acquisition, the following screen will be displayed: (if data
was collected during Data Acquisition)
Figure 33
DATA IS ONLY STORED ON THE SD CARD. NO INTERNAL FILES ARE CREATED.
If no data was logged during Data Acquisition, the following screen will be displayed:
Figure 34
Data Files
The DataLogger records four files for each data collection:
1. VPHFxxx.dat: your data file
2. VPHLxxx.dat: all logged soil data in millivolts
3. VPHWxxx.dat: all logged wash data in millivolts
4. Verisxxx.INF: calibration information for this file
File format for VPHF files is as follows:
Col A:long. Col B: lat. Col. C pH Col. D elevation Col. E: sample #
Figure 35