Veris Technologies 3100 Soil EC Mapping System (1997-2008 floppy disk drive 1.76G) - Operating Instructions - Manual (Page 22)

Veris Technologies
Pub. #OM 1CM02-1
22
Select File from the drop-down menus; select the Properties button. Click the Settings tab at the top
of the window that appears:
Click on the ASCII Setup button at the bottom of the window. The following window will appear:
Make sure the box beside “Append line feeds to incoming line ends” is checked. Click OK to close
the ASCII Setup box, then OK to close the properties box. Select the File drop down menu again,
and click on save.
2) Instrument setup:
At the display:
This is the second window you will see after powering up the unit if the system has any old files in it.
Select option 1.