Velleman projects K8039 Assembly instructions - Manual (Page 13)

13
The K8039 consists of 2 internal parts: a low-voltage part taking care of the DMX decoding and a high-
voltage part controlling the lamp. You can test the latter part with the self-testing function
 Make sure the PCB is not live!
 Close the “mode” jumper, JP2 by means of a shunt.
 Set the DMX address to 0, i.e. all switches to “OFF”.
 Connect a light bulb (min 60W) with the output (LAMP OUT).
 Switch on the K8039 (AC IN)
 The light bulb should slowly fade in and out.
 Remove the power and shunt JP2.
26. Stand-alone test
Stand-alone test
AC POWER
ADDRESS 0