Spicer Dana Spicer Steer Axles - Service Manaul - Manual (Page 41)

37
Wheel Bearing Adjustment
Pro-Torq Spindle Nut Service
Removing Pro-Torq Spindle Nut
Do not attach, loosen, or tighten the Pro-Torq spindle nut
with the keeper ring in place. The keeper ring is a locking
device and must be removed before any adjustment of the
nut.
Care must be taken when removing the keeper ring from the
spindle nut due to the spring-like properties of the ring. Use
appropriate eye protection and shielding when servicing
this part.
To remove Pro-Torq spindle nut, first remove the keeper ring.
Use a screwdriver-like device to carefully pry the keeper ring
from the undercut groove on either side of the spindle nut
until the keeper ring is released.
CAUTION
WARNING
Wheel Bearing Adjustment