beautypg.com

Shogun Motorsports Kawasaki Ninja 300 NON ABS (13-14) Frame Slider User Manual

Page 8

background image

12.

After mounting the rails in step 11 install each of the 4 round finishing plugs (99-CP-4120) into

each open end of the Shogun rails.

13.

Using the 3 zip ties supplied in the kit attach wiring loom to the left side rail as shown below

then trim excess from tie.

14.

Loosely mount the counter shaft sprocket cover to create a clearance pattern. Once you have

created clearance for the left side rail mount the counter shaft cover and tighten up.