5 assigning a keyword to a media, 1 how to (un)assign a keyword to a media, Assigning a keyword to a media – EVS IPDirector Version 5.8 - July 2010 Part 2 User's Manual User Manual
Page 87: How to (un)assign a keyword to a media, 13 h
Issue 5.8.B
IPDirector Version 5.8 – User Manual – Part 2 – Logging
EVS Broadcast Equipment – July 2010
76
2.4.13 H
OW TO
C
OPY
K
EYWORDS
B
ETWEEN
D
ICTIONARY AND
K
EYWORD
G
RID
It is possible to copy keywords from Keyword Grid to Dictionary and vice-versa.
Proceed as follows:
1.
Open both Keyword Grid and Dictionary tools.
2.
In both windows, click the Edit button to active the Edit mode.
3.
Drag the keywords from one to the other tool in any direction.
2.5 ASSIGNING A KEYWORD TO A MEDIA
Keywords can be assigned to media (log, clip or playlist) when it is created or
edited.
2.5.1 H
OW TO
(U
N
)A
SSIGN A
K
EYWORD TO A
M
EDIA
You can choose to add keywords from a keyword grid or from a dictionary. When
the media is being created or edited and the corresponding window (create or edit)
is opened, proceed as follows:
1.
Open the relevant keyword grid or the relevant dictionary.
The Apply button of the keyword grid should be active (orange).
Otherwise, click the New/Edit window again.
2.
Click the keyword.
It is added to the media window and it is highlighted in the keyword grid or
dictionary.
3.
To remove a keyword, click it again in the keyword grid or dictionary.
It is removed from the media window.
Note
The Edit mode must be inactive.