EVS IPDirector Version 5.8 - July 2010 Part 2 User's Manual - Manual (Page 19)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 2 – Logging
EVS Broadcast Equipment – July 2010
8
S
ETTING THE
T
IMECODE
D
ISPLAY
The timecode that is shown in the IP Logger window can be either:
• USER timecode (displayed in yellow)
• LTC (Longitudinal Time Code) (displayed in white)
To switch between USER and LTC timecode: right-click the USER or LTC label
(see 2. in the procedure below) and select the desired option.
The time code can be displayed in two different ways.
To change the time code display setting, proceed as follows:
1. Right-click the time code field.
The following menu is displayed:
2. Select one of the display options:
• Timecode
• Timecode and Date
1.2.5 L
OG
S
HEET
G
RID
The log sheet grid represents the log sheet content, with one row representing one
log and a customisable set of columns to display log data.
The view can be expanded thanks to a small arrow at the beginning of each
line. The following elements can be displayed on separate lines:
• Log entries