EVS XTAccess Version 1.10 - July 2009 User Manual - Manual (Page 54)

XTAccess Version 1.10 – User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – July 2009
Issue 1.10.D
53
9.3.5 R
EGISTRY
S
ETTINGS
• HKEY_LOCAL_MACHINE\SOFTWARE\EVS Broadcast Equipment\Common
\FileWriter NoBuffering: Specific setting to transfer a file without any
buffering. Recommended for writing on a MacOS workstation via network
(SMB). (default value = 0)
• HKEY_CURRENT_USER\Software\EVS Broadcast Equipment\XTAccess\Max
Transfer Rate: Maximum transfer rate (Bytes/second) for the total amount of
backup jobs (all together).
• HKEY_CURRENT_USER\Software\EVS Broadcast
Equipment\XTAccess\UpdateStatusXFileIfBackupSuccessful: Update
STATUSXFILE in MCCLIPTABLE when backup is successful
o
0: Active
o
1: Not Active
9.4 MISCELLANEOUS
• Remark 1: XT[2], GigE and XTAccess activate time-outs when no data are
transferred within a specific time interval (typically 8 seconds). Typically,
backuping a file on a remote drive via UNC path with throughput lower than 5
Mbits/s per transfer job could trigger a time-out and then cancel the job.
Network and storage must be designed accordingly.
• Remark 2: Super Slow Motion files will be saved and restored in Super Slow
Motion with all the Frame.
• Remark 3: Audio Resolution
ƒ In OP1A and Avid MXF format you can select 16 or 24 bits
ƒ In QT and QT Ref format the audio is saved in 16 bits
ƒ In EVS MXF format the audio is saved in 24 bits