EVS XTAccess Version 1.10 - July 2009 User Manual User Manual
Page 23
Issue 1.10.D
XTAccess Version 1.10– User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – July 2009
22
Command
Name
Description
Disp.
AutoUpdate
Select it to update the interface each time there is a new transfer.
Use
Primary TC
If you select this option the time code used in the file formats other
than EVS MXF (QT, QT ref, MXF OP1A, OPAtom, AVI, ..) and in the
transfers to Avid (using the Transfer Manager) will be the Primary
TC configured on your XT[2]. Otherwise, XTAccess uses the LTC.
For the EVS MXF file format: XTAccess saves both the LTC and the
Primary TC in the file and in the Medata XML File.
CleanEdit
DB
It is only available if the CleanEdit Tools have been installed. See
the section 23 ‘Integration with CleanEdit Suite’ on page 103 for
more details.
Graphical
Settings
Those settings are related to the generation of files/clips from a
picture (BMP, TIFF & TGA formats).
Video: Select either Pal or NTSC, in progressive or not.
Sequence: Enter the value of the first TC included in the destination
file/clip.
Sequence Duration: Select the duration (only valid for pictures, not
for animated sequences).
Fill & Key encoding: Check this option if you want to generate 2
synchronous files/clips based on Alpha Channel: one file/clip with
the Fill sequence and one file/clip with the Key sequence.
Add Audio when encoding Graphical Sequence: This option
allows you to add audio to the sequence created with your graphic
files.
The audio files must be 16 Bits audio file of 48 kHz (1 to 8
channels). The file format must be Broadcast Wave Uncompressed
(BWAVE) (.wav).
Default Audio Bitmap: Select the default picture you want to add to
your audio encoding. The XT[2] does not support audio only so you
have to add a graphic picture.
Serial
Number
It allows you to specify a serial number to XTAccess that will be
used to generate VarID, Material ID and UmID (LouthID) for
restoring clips. If you use several XTAccess applications on the
Same XNet network you need to specify a different serial number for