EVS OpenCube XFConverter v1.3 - User Guide - Manual (Page 16)

http://www.evs-opencube.com
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization.
16 / 38
3.2.2 AVC-Intra elementary stream
Figure 9: AVC-Intra elementary stream settings
Video System: Depending on the selected Profile and Level, the video system can be set to 720/1080 i/p
50/59.94Hz).
Bit rate: This parameter defines the video bit rate in Mbps; it can be equal to 50 or 100Mbps.
Store AVC-Intra header on each frame: This parameter is only available on the output plug-in. Some
AVC-intra streams have the “Sequence Parameters Set” (SPS) and the “Picture Parameter Set” (PPS) repeat
on each frame, others have only them on the first frame. This option allows you to control how the SPS and
the PPS are present in the AVC-Intra stream.
o “Yes”: XFConverter is repeating the SPS and the PPS found on the first frame on each frame. It is
the default value when MXF Op1a is created.
o “No”: XFConverter only keeps the SPS and PPS on the first frame. This value is mandatory when
creating MXF Panasonic P2.
o “Keep as original”: XFConverter does not modify the AVC-Intra stream.