Pgm + prv mode, 1 1pgm + prv (press a from main menu), 1 secondary menu – EVS XTnano Version 10.04 - January 2011 Operation Manual User Manual
Page 31: Econdary

XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
23
6. Pgm + Prv Mode
6.1 1PGM + PRV (PRESS A FROM MAIN
MENU)
At least 2 playback channels must be available to run this configuration.
This mode allows the operator to make replays with/or without transition effects
between all outputs. A string of replays can be put together and played back at the
operator’s discretion.
The LCD display is divided in two menus controlled by soft keys (A, B, C, and D).
To gain access to the upper menu, press MENU from the Remote Panel.
6.1.1 S
ECONDARY
M
ENU
Aud.Met. PgmSpd
PostRoll
Mix.
Sw To In
Pref
M
IX
.
/
W
IPE
L>R
/
W
IPE
R>L
/
W
IPE
U>D
/
W
IPE
D>U
/
C
UT
.
Aud.Met. PgmSpd
PostRoll
Mix.
Sw To In
Pref
These options determine the transition effect that will occur between the PGM and
PRV pictures. The mix, wipe and cut are on the same location. Pressing this
button will browse through these effects, showing the active one on the LCD menu.
Please refer to Setup menu to select the duration of the transition effect.
*PGM1*CAM A
PRV CAM B
Aud.Met. PgmSpd
PostRoll
Mix.
Sw To In
Pref
P.1 B.1
PL 11 <
Msg:
Rst
Cam
Sync
Prv
Cam A
Cam
B