EVS XFReader Version 2.6 - October 2013 User Manual - Manual (Page 42)

EVS Broadcast Equipment S.A. Issue 2.6.A October 2013
40 SDI Board Installation Procedure
To install the license, proceed as follows:
1. Use the Setup menu button, and select “Set Licence”.
2. Enter the license information provided with the DVS board in the field named “Key 1”,
then click Set Key 1.
6.3 Configure OpenCube XFReader
To configure OpenCube XFReader to use the Blackmagic or DVS board, proceed as
follows:
1. Run OpenCube XFReader, open the configuration dialog box (Menu
Control>Configure). Select the “Output” tab.
2. In the “SDI Card” dropdown box, select the right SDI board. Click OK, then quit and
restart OpenCube XFReader to apply.
Note
The number of the “Key” entry may be different.