EVS XFReader Version 2.6 - October 2013 User Manual - Manual (Page 32)

EVS Broadcast Equipment S.A. Issue 2.6.A October 2013
30 Configuring OpenCube XFReader
By checking “Advanced De-interlacing”, you can display additional deinterlacing
parameters. This is the recommended mode. Disabling this option may result in rendering
issues, depending on the graphics board installed.
If the box “Activate De-interlacing” is unchecked, deinterlacing will be disabled on the
VGA output (depending on the video codec).
You can select the deinterlacing method by checking hardware or software acceleration
(software deinterlace can be performed even if hardware deinterlacing is checked,
depending on the graphics board and video stream used).
If you check the “Multi-monitor support” option you can move the OpenCube XFReader
window from one monitor to another without restarting the playout or OpenCube
XFReader.
Note
On a network not connected to the Internet, this mode can lengthen the time
it takes to open a file.
SDI
“Stereo Downmix” allows you to enable or disable the stereo downmix on the SDI output.
The “SDI Card” combo box allows you to select the SDI output card. If you change this
option, you will have to restart OpenCube XFReader.