Pioneer DJM-700-S - Manual (Page 7)

CONNECTIONS
7
En
English
CONNECTING EXTERNAL EFFECTORS, OUTPUT CONNECTORS
Master output
This unit is furnished with balanced output MASTER 1 (supporting
XLR plugs), and unbalanced output MASTER 2 (supporting RCA
plugs).
Using the
MASTER ATT switch, adjust the output level to match
the input sensitivity of the power amplifier used.
If the operating panel’s
MONO/STEREO switch is set to [ MONO ],
the master output will be a monaural combination of L+R
channels.
Booth monitor output
Unbalanced output supporting RCA-type plug. The sound volume
for this output is controlled by the
BOOTH MONITOR LEVEL dial,
independently of the master output level setting.
Recording output
These are output connectors for recording, supporting RCA plugs.
Digital output
This is a coaxial digital output connector, supporting RCA plugs.
The sampling frequency can be set to 96 kHz/24-bit format or
48 kHz/24-bit format to match the connected device.
• Turn power off before changing this switch position.
External effector
Use a cable with Ø6.3 mm phone plugs to connect the DJ mixer’s
SEND connectors to the effector’s input connectors.
When using an effector with monaural inputs, connect only to the
DJ mixer’s L channel output. In this way, the mixed L+R audio
signal will be sent to the effector. In the same way, use a cable with
Ø6.3 mm phone plugs to connect the DJ mixer’s
RETURN
connectors to the output connectors of the effector.
If the effector has only monaural output, connect to the DJ mixer’s
L channel input only. The signal from the effector will be input to
both L and R channels.
When using an external effector, set the effect selector to [
SND/
RTN ].
POWER
ON
OFF
BOOTH REC
L
R
L
R
L
R
L
R
L
R
PHONO LINE
CH-4 CH-3 CH-2 CH-1
PHONO LINE PHONO
SIGNAL GND
SEND DIGITAL OUT
(MONO)
CD
R L
LINE
CONTROL CONTROL
CD
1 GND
3 COLD
2 HOT
-6dB -3dB 0dB
MIC 2
RETURN
(MONO) R L
R L
R L
MASTER1
MASTER2
MASTER
ATT.
48k 96k
fs(Hz)
MIDI OUT
Power amplifier
(RCA plug input
connectors)
Cassette deck
(analog input
recording device)
Sampling frequency
selector switch
Digital input AV amplifier
(digital input
recording device)
Power amplifier
(XLR plug input connectors)
MASTER ATT switch
Power amplifier
(for booth monitor)
External effector
01_DJM-700_En.book 7 ページ ２００７年７月１０日 火曜日 午後８時４１分